Hydraulic reach mowers TSH Series

TSH620 Power

Decespugliatrici idrauliche TSH620 Power
Max horizontal reach
6,15 m
Tractor power
90 ÷ 110 HP/PS
Min. tractor weight
3600 kg
Min. tractor width
2,30 m
1370 kg
Rotor power
64 HP/PS
Power of hydraulic system
79 HP/PS
Flail head angle
Max Cutting width
8 cm
The TSH Power series which includes a closed circuit piston system is capable of delivering 64HP of power to the rotor and thanks to the combination with the 540 rpm gearbox permits a significant reduction in consumptions.
Download catalogue > PDF (3,7 Mb)

DSR - Double Sense of Rotation

Standard equipment on all reach mowers.

PSS - Power Slew Security

Designed to exclude the accumulator on the power slew ram (when working on a hillside).

SRA - self-return system

In case of hydraulic break away, an accumulator controlled auto reset valve allows the automatic return of the arm into the working position.

SAB - Roll-over protection system

Automatic roll-over protection when the first arm exceeds 90° in vertical position.

LFA - Lift Float Accumulator (optional)

(lift float on the 1st arm by accumulator) Permits the engagement and disengagement of the lift float on the 1st arm.

EFS - Electronic Floating System (optional)

It permits the flail head to follow the ground contours in an effective way. The weight will be tranferred to the tractor, decreasing the friction during work and at the same time increasing working speed.

“DELTA BOX” frame

In consideration of the stress the reach mowers are subjected to during work, Ferri developed a new concept of frame, called «DELTA BOX» made of two sheet walls, which are laser-cut and joined with formed steel. The whole is welded on a robotized system; the structural design achieved is extremely light weight and strong.


The flail head can rotate by 180° by means of an racket and pignon gear, allowing the work forwards and backwards.
Floating Head system
Self levelling device
High Performance cast iron gear box
Power slew
Steel Frame structure with variable section
Pivoting bracket
Pressurized oil tank
140 L
Drop forged flail head linkages
1st arm rectangular section
120 x 180 mm
Parts made out of WELDOX 700 steel
Oil cooler in Alluminum with thermostat
Hour meter
Bumper with illumination system
Hydraulic system
Totally independent hydraulic system
ATT/4 sliding braket
Piston hydraulic system (closed circuit)
Universal Axle Bracket
Cast iron hydraulic pump servicing the rotor
Cast iron hydraulic motor
Flail head
Double skin
“OVERLAP” with double rows spiral rotor
Specular 180° rotor
Rotor balancing on side flanges
Single toothed belt drive
Cutting tools fitted on pins (rotor with 22 postions)
Adjustable rear roller
Rear roller HD
Front and rear abrasion resistant guard for flail head
Replaceable skids
Block valves to lock the pivoting bracket during transfer
Automatic hydraulic block for transport
Kit to avoid arm overturn

ADVANCE TRONIC - Proportional electrical control

Compact and ergonomic console. The joystick controls the proportional function of the first and second booms. The rotation of the booms and tilting of the head are are proportional functions driven by “roller” controls on the joystick. There are also buttons on the joystick that handle extension (for telescopic models). The rotor and the rapid rotor block (about six seconds) is electrically controlled with the buttons on the console. The operator’s work is facilitated by the simple push of a button to manage rotor operation.

TNHC 125

Professional Flail head suitable for reach mowers with gear/piston (closed circuit) hydraulic system. Cast iron motor with toothed belt drive. “OVERLAP” rotor with 2 spiral rows (180° specular rotor - alternating rotor sides it is possible to use the other side of the blade to extend the blade life).
Cutting width: 1,25 m
Weight: 315 Kg
Max cutting diameter: 8 cm

TR 13

Cutter bar
Cutting width: 1,30 m
Max cutting diameter: 8 cm

TR 22

Cutter bar
Working width: 2,20 m
Max cutting diameter: 8 cm

FF 45

Ditch cleaner.
Working width: 0,45 m

FF 60

Ditch cleaner.
Working width: 0,60 m

SE 31

Blower recommended in works along roads in order to clean the pavement and ground from the debris.
Airflow output: 90mc/min

Information request

Once you have filled in and sent this form, you will be sent a specific reply to your request as soon as possible.
Please complete all fields carefully, and make sure that you type in your data correctly so that we can contact you.
(* Mandatory fields)
* Activicty sector
How did you know us?
This Website uses technical and users profiling cookies (first or third parties ones) for analytics service. Keeping web browsing or entering any item of the website without changing your browser settings, means to implicitly accept to receive cookies on our website. You may change the settings of cookies at any time by selecting the “PRIVACY POLICY” link in the website from which you may easily refuse to give consent to the installation of cookies.