TSP550VISIONenergy.png

Hydraulic reach mowers TSP Series

TSP550 Vision Energy

Decespugliatrici idrauliche TSP550 Vision Energy
Max horizontal reach
5,52 m
Tractor power
90 ÷ 100 HP/PS
Min. tractor weight
4000 kg
Min. tractor width
2,30 m
Flail head forward
1,64 m
Weight
1520 kg
Rotor power
57 HP/PS
Power of hydraulic system
63 HP/PS
Flail head angle
235°
Max Cutting width
8 cm
The TSP hydraulic reach mower model is the ideal machine for professional use in the maintenance of roads and highways. Available in the version with the hydraulic system with gears in open circuit (ENERGY) or with the hydraulic system with pistons in closed circuit (POWER), it can satisfy the highest professional requirements.The TSP model is recommended for all possible work sites (mowing, shredding and pruning). It is the first model that adopts REVERSE SAFETY (patent pending) which allows the arm to be rotated forward in the event that an obstacle is hit during the reverse phase with the arm open. The particular kinematics of this model allows you to work in total comfort, and there are also standard devices for active safety to protect the operator and the vehicle used; such as checking the oil temperature of the hydraulic system: in the event of an alarm, the operation of the cylinder head rotor is blocked, but not the arms to allow them to be repositioned safely. The new head, TNH (with direct transmission) and TNHC (with belt transmission) of 1.25 meters of working width, has been strengthened in the frame and offers an innovative and improved solution in the rear roller with new supports that require a very limited maintenance and strong resistance to stress.
 
Download catalogue > PDF (3,9 Mb)
container 712 eng

DSR - Double Sense of Rotation

Standard equipment on all reach mowers.
container 718 eng

PSS - Power Slew Security

Designed to exclude the accumulator on the power slew ram (when working on a hillside).
container 719 eng

SRA - self-return system

In case of hydraulic break away, an accumulator controlled auto reset valve allows the automatic return of the arm into the working position.
container 723 eng

SAB - Roll-over protection system

Automatic roll-over protection when the first arm exceeds 90° in vertical position.
container 729 eng

LFA - Lift Float Accumulator

(lift float on the 1st arm by accumulator) Permits the engagement and disengagement of the lift float on the 1st arm.
container 736 eng

“DELTA BOX” frame

In consideration of the stress the reach mowers are subjected to during work, Ferri developed a new concept of frame, called «DELTA BOX» made of two sheet walls, which are laser-cut and joined with formed steel. The whole is welded on a robotized system; the structural design achieved is extremely light weight and strong.
Machine
 
Floating Head system
Standard
High Performance cast iron gear box
Standard
Power slew
122°
Steel Frame structure with variable section
Standard
Pivoting bracket
Standard
Pressurized oil tank
170 L
Drop forged arm brackets
Standard
Drop forged flail head linkages
Standard
Oil cooler in Alluminum with thermostat
Standard
Hour meter
Standard
Bumper with illumination system
Standard
Hydraulic system
 
Totally independent hydraulic system
Standard
Gear hydraulic system
Standard
ATT/4 sliding braket
Optional
Universal Axle Bracket
Optional
Cast iron hydraulic pump servicing the rotor
Standard
Cast iron hydraulic motor
Standard
Flail head
 
Double skin
Standard
“OVERLAP” with double rows spiral rotor
Standard
Specular 180° rotor
Standard
Rotor balancing on side flanges
Standard
Single toothed belt drive
Optional
Adjustable rear roller
Standard
Rear roller HD
Optional
Front and rear abrasion resistant guard for flail head
Standard
Replaceable skids
Standard
Safety
 
Hydraulic breakaway with accumulator controlled autorest device
Standard
Block valves to lock the pivoting bracket during transfer
Standard
Automatic hydraulic block for transport
Standard
Kit to avoid arm overturn
Electric
Brackets
 
Stabilizers
Optional
Delta bracket
Optional
img-comandi-sctronic.jpg

SC TRONIC “Dual” - Two-section Load Sensing proportional electrical control. With CAN-Bus technology

The SC (Speed Criterions) Dual control gives you the ability to select different boom operating modes depending on the type of work you need to do. The joystick controls the proportional function of the first and second booms. The rotation of the booms and tilting of the head are are proportional functions driven by “roller” controls on the joystick. There are also buttons on the joystick that handle extension (for telescopic models) and the floating head system. In the detached section of the console, the buttons control the rotor, boom suspension, the ignition of the nitrogen accumulator for automatic return to the working position and the Electronic Floating System EFS for suspension of the head.
container 923 eng
container 932 eng

TNH 125 NG

Professional Flail head suitable for reach mowers with gear hydraulic system and cast iron motor withdirect drive. “OVERLAP” rotor with 2 spiral rows (180° specular rotor, alternating rotor sides it is possible to use the other side of the blade to extend the blade life). Reinforced frame, sides in STRENX 700, internal vault reinforced with HARDOX 400.
Cutting width: 1,25 m
Weight: 315 Kg
Max cutting diameter: 8 cm
container 22447 eng
container 22446 eng

TNHC 125 NG (optional)

Professional Flail head suitable for reach mowers with gear/piston (closed circuit) hydraulic system. Cast iron motor with toothed belt drive. “OVERLAP” rotor with 2 spiral rows (180° specular rotor - alternating rotor sides it is possible to use the other side of the blade to extend the blade life). Reinforced frame, sides in STRENX 700, internal vault reinforced with HARDOX 400.
Cutting width: 1,25 m
Weight: 315 Kg
Max cutting diameter: 8 cm
container 21192 eng

TR 13

Cutter bar
Cutting width: 1,30 m
Max cutting diameter: 8 cm
container 21193 eng

TR 22

Cutter bar
Working width: 2,20 m
Max cutting diameter: 8 cm
container 21189 eng

FF 45

Ditch cleaner.
Working width: 0,45 m
container 21191 eng

FF 60

Ditch cleaner.
Working width: 0,60 m
container 21188 eng

SE 31

Blower recommended in works along roads in order to clean the pavement and ground from the debris.
Airflow output: 90mc/min

Information request

Once you have filled in and sent this form, you will be sent a specific reply to your request as soon as possible.
Please complete all fields carefully, and make sure that you type in your data correctly so that we can contact you.
(* Mandatory fields)
* Activicty sector
How did you know us?
This Website uses functional and users profiling (anonymized) cookies, first and third parties’ ones, for analytics service. Keeping web browsing without closing this banner or selecting “only functional cookies” the website will use only functional cookies, instead, selecting “allow cookies” will use all the cookies as described in the “PRIVACY POLICY”. You may change the settings of cookies at any time by selecting the “PRIVACY POLICY” link on the website from which you may easily refuse to give consent to the installation of cookies.
Allow cookies Only functional cookies