logo-tsf.png

Hydraulic reach mowers TSF Series

TSF600

icone-dettaglio-tsf.jpg
Max horizontal reach
5,75 m
Tractor power
130 ÷ 160 HP/PS
Min. tractor weight
4800 kg
Min. tractor width
2,50 m
Weight
1500 kg
Rotor power
52 HP/PS
Power of hydraulic system
75 HP/PS
Flail head angle
180°
Max Cutting width
8 cm
The TSF600 model is an ideal right/left flail mower for contractors and green maintenance operators, with large tractors and power, where the machine is fully assembled in the front area of the vehicle.
 

DSR - Double Sense of Rotation

Standard equipment on all reach mowers.

PSS - Power Slew Security

Designed to exclude the accumulator on the power slew ram (when working on a hillside).

SRA - self-return system

In case of hydraulic break away, an accumulator controlled auto reset valve allows the automatic return of the arm into the working position.

BMS - Variable forward reach

Designed to move the flail head from standard to forward position, always keeping the flail head parallel to the ground.

LFA - Lift Float Accumulator

(lift float on the 1st arm by accumulator) Permits the engagement and disengagement of the lift float on the 1st arm.

EFS - Electronic Floating System

It permits the flail head to follow the ground contours in an effective way. The weight will be tranferred to the tractor, decreasing the friction during work and at the same time increasing working speed.

HYDRAULIC BREAKAWAY

Hydraulic breakaway system on power slew ram through a max. relief valve (protection of arms in case of hitting against obstacles).
Machine
 
Floating Head system
Standard
High Performance cast iron gear box
Standard
Power slew
Standard
Pressurized oil tank
80 L
Drop forged flail head linkages
Standard
1st arm rectangular section
Standard
Second arm with increased sheet section
Standard
Oil cooler in Alluminum with thermostat
Standard
Hour meter
Standard
Hydraulic system
 
Totally independent hydraulic system
Standard
Gear hydraulic system
Standard
Gear hydraulic system
Standard
Piston hydraulic system (open circuit)
Standard
Cast iron hydraulic pump servicing the rotor
Standard
Cast iron hydraulic motor
Standard
Flail head
 
Double skin
Standard
“OVERLAP” with double rows spiral rotor
Standard
Specular 180° rotor
Standard
Rotor balancing on side flanges
Standard
Cutting tools fitted on pins (rotor with 22 postions)
Standard
Adjustable rear roller
Standard
Rear roller HD
Standard
Front and rear abrasion resistant guard for flail head
Standard
Replaceable skids
Standard
Safety
 
Hydraulic breakaway with accumulator controlled autorest device
Standard
img-comandi-sctronic.jpg

SC TRONIC “Dual” - Two-section Load Sensing proportional electrical control. With CAN-Bus technology

The SC (Speed Criterions) Dual control gives you the ability to select different boom operating modes depending on the type of work you need to do. The joystick controls the proportional function of the first and second booms. The rotation of the booms and tilting of the head are are proportional functions driven by “roller” controls on the joystick. There are also buttons on the joystick that handle extension (for telescopic models) and the floating head system. In the detached section of the console, the buttons control the rotor, boom suspension, the ignition of the nitrogen accumulator for automatic return to the working position and the Electronic Floating System EFS for suspension of the head.

TNH 125

Professional Flail head suitable for reach mowers with gear hydraulic system and cast iron motor withdirect drive. “OVERLAP” rotor with 2 spiral rows (180° specular rotor, alternating rotor sides it is possible to use the other side of the blade to extend the blade life).
Cutting width: 1,25 m
Weight: 315 Kg
Max cutting diameter: 8 cm

TR 13

Cutter bar
Cutting width: 1,30 m
Max cutting diameter: 8 cm

TR 22

Cutter bar
Working width: 2,20 m
Max cutting diameter: 8 cm

CS 150

Cutter bar for hedges.
Working width: 1,50 m
Max cutting diameter: 1 cm

CSP 150

Cutter bar for hedges
Working width: 1,50 m
Max cutting diameter: 2 cm

FF 45

Ditch cleaner.
Working width: 0,45 m

FF 60

Ditch cleaner.
Working width: 0,60 m

SE 31

Blower recommended in works along roads in order to clean the pavement and ground from the debris.
Airflow output: 90mc/min

Information request

Once you have filled in and sent this form, you will be sent a specific reply to your request as soon as possible.
Please complete all fields carefully, and make sure that you type in your data correctly so that we can contact you.
(* Mandatory fields)
* Activicty sector
How did you know us?
This Website uses technical and users profiling cookies (first or third parties ones) for analytics service. Keeping web browsing or entering any item of the website without changing your browser settings, means to implicitly accept to receive cookies on our website. You may change the settings of cookies at any time by selecting the “PRIVACY POLICY” link in the website from which you may easily refuse to give consent to the installation of cookies.
Ok